FCI Home Appliances ECCB 30" User Manual download pdf (Page 13)

Installation Manual

Models ECCB/TCCB 30” – 36” ENGLISH

Recommended Minimum

kW Rating on

serial plate

Circuit protection

in amperes

Wire size

(AWG)

0-4.8

20 12

4.9-6.9

30 10

7.0-9.9

40 8

10.0-11.9

50 8

12.0-14.9

60 6

Be sure your appliance is properly installed and

grounded by a qualified technician. Ask your

dealer to recommend a qualified technician or an

authorized repair service. This cooktop does not

require a neutral connection. If the cooktop Is to

be completely enclosed In a cabinet, feed the

cooktop cable through the opening in the cabinet.

Make the electrical connection following the

appropriate steps for your installation.

This appliance is manufactured with a green ground

wire connected to the cooktop chassis. After making

sure that the power has been turned off, connect the

flexible conduit from the cooktop to the junction box

using a U.L. listed conduit connector. Figures 14 and

15 and the instructions provided below present the

most common way of connecting the cooktops. Your

local codes and ordinances, of course, take

precedence over these instructions. Complete

electrical connections according to local codes and

ordinances

DANGER

Risk of Electric Shock, frame grounded to

neutral of appliance through a link.

Grounding through the neutral conductor is prohibited

for new branch-circuit installations (1996 NEC);

mobile homes; and recreational vehicles, or in an area

where local codes prohibit grounding through the

neutral conductor.

3-Wire branch circuit

Where local codes allow the connection of ground

wire from the cooktop to the branch circuit neutral wire

(gray or white colored wire) proceed as follows (see

figure 14).

1. If local codes permit, connect the green GROUND

wire from the cooktop to the branch circuit neutral

wire (gray or white colored wire).

2. Connect the red and black leads from the cooktop

to the corresponding leads in the junction box.

Figure 14.

4-Wire branch circuit

Refer to figure 15:

1. Connect the green ground wire from the cooktop

to the ground wire in the junction box (bare or

green colored wire).

2. Connect the red and black leads from the cooktop

to the corresponding leads in the junction box.

3. Connect the white wire from the cooktop to the

neutral (gray or white) wire in the junction box.

4. Terminate and insulate the neutral (gray or white

colored wire) in the junction box.

Figure 15.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments

FCI Home Appliances ECCB 30" User Manual Page 13

Comments to this Manuals